Long-life polishing film AAS-DM series (for pre-process)
The AAS-DM series diamond polishing film is a next-generation polishing film that achieves both long life and high yield.
- It is most suitable for pre-process polishing of ADS finishing process of optical connector end faces.
- Unprecedented long life has been achieved.
- Since the variation in diamond grain size is suppressed, the ferrule end face is finished with a stable surface roughness.
- Compatible with low load grinder and high load grinder, you can choose any grinder.
| type | AAS-DM series diamond polishing film |
|---|---|
| Abrasive grain size | AAS-DM01: 1 μm, AAS-DM03: 3 μm, AAS-DM09: 9 μm |
| standard size | Round type (Disk type) : 127mm (5inch) dia. (25pcs/set) |
| Square type (Roll type): 140mm (5.5inch) x 12m (1/set) | |
| base thickness | 75 μm (3 mils) |
| Applicable ferrule | 2.5mm diameter zirconia ferrule |
| 1.25mm diameter zirconia ferrule | |
| Storage conditions | Temperature: 10-30 degrees, Humidity 30-60% |
* Polishing data is an example and may differ depending on polishing conditions, equipment used, shape of ferrule, etc.
Measurement data 1
This is data on the amount of polishing versus polishing time and scratches on the end face of an optical fiber connector when using a polishing film.
[Polishing conditions]
Polisher: High-Load Polisher
Inspection machine: FVDW 2409 × 400 (JDSU blue LED)
Number of samples: 2.5mm diameter ferrule x 18 pieces
It can be seen that the AAS-DM01 film maintains a stable amount of polishing even when the polishing time is long.
AAS-DM09→DM03→DM01 end face photo after polishing
| AAS-DM01 | Other company 1 | Other company 2 | Other company 3 |
| | | |
Measurement data 2
This is data on the amount of polishing versus polishing time and scratches on the end face of an optical fiber connector when using a polishing film. We use a low-load type polishing machine.
[Polishing condition]
Polisher: Low-Load Polisher
Inspection machine: FVDW 2409 × 400 (JDSU blue LED)
Sample quantity: 2.5mm diameter ferrule x 12 pieces
It can be seen that the AAS-DM01 film maintains a stable amount of polishing even when the polishing time is long.
AAS-DM09→DM01 end face photo after polishing
| AAS-DM01 | Other company 1 | Other company 2 | Other company 3 |
| | | |
*Design and specifications are subject to change without notice.