EXFO BA-4000誤碼儀 100G/400G電誤碼儀
EXFO BA-4000誤碼儀 100G/400G電誤碼儀

EXFO BA-4000誤碼儀 100G/400G電誤碼儀


Bit error rate (BER) is a key performance attribute for digital communications. The signal transmission quality of a network, subsystem or component, can be evaluated using a BER tester, which compares the data stream received to the transmitted sequence and computes the number of errors.

The BA-4000 Bit Analyzer is an electrical NRZ/PAM4 BER tester designed for the production floor. It comes in six models:

  • BA-4000-4-28-NRZ: 100G BERT including 4-channel NRZ 28 Gbit/s.
  • BA-4000-8-28-NRZ: 200G BERT including 8-channel NRZ 28 Gbit/s.
  • BA-4000-4-28-PAM: 100G/200G BERT enabling either 4-channel NRZ 28 Gbit/s or 4-channel PAM4 28 GBd.
  • BA-4000-4-56-PAM: 200G/400G BERT enabling either 4-channel NRZ 56 Gbit/s or 4-channel PAM4 56 GBd.
  • BA-4000-8-28-PAM: 200G/400G BERT suitable for either 8-channel NRZ 28 Gbit/s or 8-channel PAM4 28 GBd.
  • BA-4000-8-56-PAM: 400G/800G BERT suitable for either 8-channel NRZ 56 Gbit/s or 8-channel PAM4 56 GBd.

The BA-4000 Bit Analyzer leverages FEC simulation capabilities to provide powerful analysis for burst error. Some of the main FEC features are:

  • PRBS error check and correction
  • Pre-FEC and Post-FEC BER
  • KP4/KR4 and low latency FEC protocols
  • FEC Generator and Checker (FGC) to address RS-FEC Scrambled Idle Pattern
  • FEC symbol error distribution plot: codewords vs symbols errors
  • FEC margin auto-calculation

Recommend